塑膠顏色(染色/配色)Plastic color(dyeing/color matching)-康德富塑膠(影片)
2023-04-20塑膠射出顏色五花八門,什麼顏色都能製作(可客製化顏色)
一般會提供色卡編號或者樣品對色
Plastic injection colors are varied, any color can be made (customizable color)
Generally, the color card number or sample color matching will be provided
塑膠材質能做各種顏色,主要是因為塑膠能夠染色
染色的方式主要分為三種
1.原料抽色
2.原料添加色母
3.原料添加色粉
Plastic materials can be made in various colors, mainly because plastic can be dyed
There are three main types of dyeing
1. Raw material color extraction
2. Add color masterbatch to raw materials
3. Add toner to raw materials
原料抽色
塑膠料由染色場進行染色
並再製成塑膠粒
優點
1.塑膠射出顏色最穩定
2.工廠環境污染低
缺點
1.抽色有最低數量限制
2.費用最高
Raw material coloring
The plastic material is dyed by the dyeing house
and remade into plastic pellets
advantage
1. The plastic injection color is the most stable
2. Low pollution of the factory environment
shortcoming
1. There is a minimum quantity limit for drawing colors
2. Highest cost
原料添加色母
塑膠粒由塑膠射出廠添加色母
均勻混練後上機生產
優點
1.塑膠射出顏色穩定
2.工廠環境污染低
缺點
1.防火料,特殊顏色不易上色
Add color masterbatch to raw materials
The plastic pellets are made of plastic injection factory to add color masterbatch
Machine production after uniform mixing
advantage
1. Plastic injection color is stable
2. Low pollution of the factory environment
shortcoming
1. Fireproof material, special color is not easy to color
原料添加色粉
塑膠粒由塑膠射出廠添加色粉
均勻混練後上機生產
(混練過程色粉會飛揚)
優點
1.染色成本最低
2.可少量生產
缺點
1.生產設備會附著生產顏色
2.工廠環境污染高
Raw material added toner
The plastic pellets are made of plastic injection factory to add toner
Machine production after uniform mixing
(The toner will fly during the mixing process)
advantage
1. Lowest dyeing cost
2. Can be produced in small quantities
shortcoming
1. The production equipment will be attached to the production color
2. High pollution of the factory environment
結論:
少量生產以色粉為主
量大穩定以抽色為主
in conclusion:
A small amount of production is mainly toner
Large amount and stable, mainly based on color extraction
.
.
.
康德富塑膠股份有限公司,位於台中大里區
專營各類塑膠射出製造,塑膠模具開發,射出成形應用範圍包含3C電子類塑膠、塑膠燈具類、腳踏車塑膠零配件、精密塑膠齒輪、汽車類塑膠零配件、醫療器材塑膠件、高端工程塑膠成型件等等。
- Kanderfu Plastic Co., Ltd., located in Dali District, Taichung
Specializing in all kinds of plastic injection manufacturing, plastic mold development, injection molding applications include 3C electronic plastics, plastic lamps, bicycle plastic parts, precision plastic gears, automotive plastic parts, medical equipment plastic parts, high-end engineering plastic molding parts and many more.
更多塑膠射出介紹
FB https://www.facebook.com/kanderfu/
mail sales@kanderfu.com
電話:04-24968996
傳真:04-24926209
地址:(412)台中市大里區仁化路727號如有任何疑問歡迎與我聯絡!!!