塑膠纖維複合材料Plastic fiber composites-康德富塑膠
2022-09-08塑膠纖維複合材料 Plastic fiber composites
塑膠射出材料相對於金屬材料脆弱，需要與其他元素複合，才能有效提高塑膠製品強度。
在塑膠料中添加纖維，即複合元素的一種。纖維分為玻璃纖維與碳纖維材質，又以長度區分為長纖、短纖。
目前市售的長纖塑膠外觀約直徑3mm長11mm。纖維長度增加，合適纖維材質再與塑膠複合才能有效增加機械強度。一般而言長纖應用，材質建議使用碳纖維。
當纖維比例增加到35%後，機械強度隨比例增加，強度提升明顯趨緩，比重也會按纖維比例增加。(POM最高增加比例為25%)
纖維配向，也是強度提升的重要因素。配向正確，可達到最佳化改善。
Compared with metal materials, plastic injection materials are fragile and need to be compounded with other elements to effectively improve the strength of plastic products.
Fibers, a type of composite element, are added to plastic materials.
Fiber is divided into glass fiber and carbon fiber material, and is divided into long fiber and short fiber by length.
At present, the long-fiber plastic on the market has an appearance of about 3mm in diameter and 11mm in length. The fiber length increases, and the appropriate fiber material is compounded with plastic to effectively increase the mechanical strength. Generally speaking, for long fiber applications, carbon fiber is recommended as the material.
When the fiber proportion increases to 35%, the mechanical strength increases with the proportion, the strength increase obviously slows down, and the specific gravity also increases according to the fiber proportion. (The maximum increase rate of POM is 25%)
Fiber orientation is also an important factor for strength improvement.
Alignment is correct, can achieve optimal improvement.
常見纖維複合塑膠材料：
Common fiber composite plastic materials:
- 1. PA(尼龍樹脂)+纖
- PA (nylon resin) + Fiber
- 2. PBT(聚丁烯對苯二甲酸酯)+纖
- PBT (polybutylene terephthalate) + Fiber
- 3. PP(聚丙烯樹脂)+纖
- PP (polypropylene resin) + Fiber
- 4. POM(聚縮醛樹脂)+纖
- POM (polyacetal resin) + Fiber
- 5. PC(聚碳酸酯樹脂)+纖
- PC (polycarbonate resin) + Fiber
- 6. PEEK(聚醚醚酮)+纖
- PC (polyetheretherketone) + Fiber
*我司為塑膠射出工廠，並未販售塑膠原物料
We are plastic injection factory and does not sell plastic raw materials
